You need a particular dress that you’ve worn the other day. After washing, you found out that your dryer not drying.
Mix loads can prevent fabrics from fully drying. For instance, if you combine clothes with towels, you’ll still feel a little damp after the cycle.
It is alarming when you notice that your laundry didn’t even dry at all. A simple fix that you can try is cleaning the debris and lint in the vent tube and exhaust duct.
Lint can decrease airflow and hinder the performance of the dryer. It can even cause a fire.
Let’s first understand how a dryer works:
Airflow and heat are necessary components of every dryer. If any of these two has a problem, it will cause the dryer not to do its work.
What to do? Here are troubleshooting tips that you can do for this dryer problem:
Clean the lint filter.
The lint filter should be cleaned after every use. If too much dirt accumulates, the drying time is affected.
The less lint or no lint there, the better. The drying mechanism of your dryer will be good if it stays clean and unclogged.
Air cannot circulate in the dryer smoothly when the lint is blocked. Since there is no proper airflow, the dryer can’t dry the fabrics.
Check the exhaust vent.
The exhaust vent can also get accumulated with dirt. This causes the dryer to fail.
If air is trapped in the vent, it can lower the drying time of the dryer. If it is not fixed immediately, the dryer will eventually stop drying the laundry.
You can improve the efficiency and longevity of your dryer if you make it a habit to clean your dryer exhaust vent. Keep in mind that it is a fire hazard, so make sure to properly check it each time.
Monitor the exhaust vent and the dryer vent hose. The vent hose usually emits vapor clouds during winter. If it is not doing this, you need to check the hose because it can affect the drying capacity of your machine.
A defective thermostat can be blamed for not drying your clothes. The operating thermostat also called the cycling thermostat monitors the temperature inside the dryer drum.
It works by controlling the heating element in an electric dryer and the burner in the gas dryer. It turns on and off the heat source to achieve a temperature of 150 degrees Fahrenheit.
When the thermostat stops working, it cannot control the heat source anymore. It can cause the dryer to stop drying or even overheat.
Consult a trained technician who can handle the dryer problem. Technicians can replace the thermostat if this is the problem.
The drum is not turning.
If the dryer drum is not turning, it can cause the machine to stop drying the laundry. Remember that spinning causes the clothes to dry.
It can be possible that the drum belt is loose or broken. With prolonged use, it can break the belt.
Worn out support rollers.
The support rollers should properly spin to allow the right airflow in the machine. Defective rollers will cause the dryer to stop spinning.
You can detect this issue when you hear a loud noise coming from your machine. Have it checked at once to prevent more serious problems with your dryer machine.
Faulty heating element.
A defective or completely burned-out heating element can cause the dryer to extend its drying time. If you continue to use your dryer under this condition, it can permanently damage the heating element.
Call a technician who is trained in repairing this issue. Heating elements can be dangerous to handle when inexperienced personnel tries to energize it.
To prevent all these issues, you should have regular dryer maintenance. It should include cleaning of the lint, vent tube, power cord, and exterior.
You can schedule maintenance with a trained technician in your area. They usually clean the inside drum and outside casing with water and soap.
Having regular maintenance can ensure that everything in your dryer is working properly. You can avoid problems and extra costs that could have been avoided.
If you want to extend the life of your dryer, you should know how to take care of it. Make sure that you’re hiring certified technicians and not just anyone with no experience and expertise.